Dear dishwasher owners! We are trying to collect here as much useful information as possible about dishwashers, so if you have something to say, say it. :-) (even without registration)
I’m thinking of buying myself a narrow machine. I looked at a whole bunch of models on Yandex.market, and somehow settled on the Siemens SR 24E201. Everything seems to be fine about it. But this is also alarming - continuous positive reviews about her.
Are these odes of praise a product of Siemens marketing?
If anyone is familiar with this dishwasher, please write your review. I don’t want to buy into the PR hype of marketers, I want real reviews.
I’m thinking of buying myself a narrow machine. I looked at a whole bunch of models on Yandex.market, and somehow settled on the Siemens SR 24E201. Everything seems to be fine about it. But this is also alarming - continuous positive reviews about her. Are these odes of praise a product of Siemens marketing? If anyone is familiar with this dishwasher, please write your review. I don’t want to buy into the PR hype of marketers, I want real reviews. :read:
[quote="Gambit"][post]64 [/post] Aren’t these laudatory odes a product of Siemens marketing? [/quote] For some reason it seems to me that Siemens doesn’t care about Yandex Market.
Good day, please tell me, PMM Siemens SR24E205RU, when you plug it into the socket, water starts to fill, and the faucet diode lights up, what could be the reason
Last post
The aquastop valve may be stuck in the open position. You can check it by applying 220 to the contacts.
There were problems with the dishwasher:
At first, after washing, the pump stopped turning off. The wash is finished, but the pump continues to work. I discovered that there was water in the pan and therefore the pump did not turn off, thinking that the water needed to be pumped out.
Afterwards, in addition to this problem, I discovered that the machine did not heat the water. I took it apart,...
Initially the car flashed on the display. It was possible to change the settings, but it would not start. I checked the module at a glance, there were no external traces that there was a jump in the network. I just turned off the power to the engine and now only two diodes are blinking on the display indicating that there is no water supply and that there is no rinse. Any ideas what’s wrong?
Good afternoon. Please help. PMM Siemens S9VT1S pr. number SE66T372EU/01 stopped draining water. I took it apart and washed the float chamber. During disassembly, water remained in the pan. At startup, Aquastop worked. I took it all apart again and dried it. Still, it doesn’t pour water, the aquastop doesn’t open, I try to apply 220 volts directly to the aquastop valves, it opens and the hose is...
Mobile version
sergey.jilin